Page 4
LEGEND Item Kobold VR300 Robot Vacuum Cleaner and accessories Filter Robot Vacuum Cleaner Dust container Operator panel with 2 function keys Suction opening ‘Wi-Fi’ LED function key Dust compartment cover ‘SPOT’ LED indicator Dust compartment ‘BASE’ LED indicator Laser scanner ‘ECO mode’...
Page 5
PRELIMINARY REMARKS SIGNS AND SYMBOLS Congratulations on the purchase of your new Kobold VR300 The symbols in this instruction manual have the following meanings: Robot Vacuum Cleaner. The lightweight and manoeuvrable robot vacuum cleaner is going to help keep your home clean Warning symbol and tidy.
Using the Kobold Robot app ..41 Information on environmental Carrying the Kobold VR300 Removing from the network ..42 protection ....57 Robot Vacuum Cleaner .
For your safety FOR YOUR SAFETY The greatest possible safety is a characteristic of Vorwerk products. However, the product safety of the Kobold VR300 Robot Vacuum Cleaner and its accessories can only be assured if you observe the information in this manual.
• Never attempt to repair the device yourself. Repairs to electrical appliances may only be carried out by a Vorwerk Customer Service Center, a workshop authorised by Vorwerk or a similarly qualified person. Defective parts may only be replaced by original replacement parts in order to avoid hazards.
Page 9
• Never pour water over the device or base station or hold them under running water. • Do not use the Kobold VR300 Robot Vacuum Cleaner on damp floors or in places where there is a risk that the device may come into contact with liquids or be submerged in water.
Page 10
Explosion hazard! • Do not vacuum up explosive or readily inflammable substances. • Never throw the Kobold VR300 Robot Vacuum Cleaner into an open fire. Choking hazard! • The cover on the USB port under the dust compartment cover is a small part.
Page 11
For your safety Risk of injury from pinching! • Keep your distance from the moving components of the Kobold VR300 Robot Vacuum Cleaner. Risk of injury due to battery leakage! • Leaking batteries must not come into contact with the eyes or mucous membranes. Wash your hands and rinse your eyes with clean water.
Page 12
• The Kobold VR300 Robot Vacuum Cleaner is only suitable for cleaning indoor floors. • Do not allow children to play with the Kobold VR300 Robot Vacuum Cleaner. • Keep children and pets away from the Kobold VR300 Robot Vacuum Cleaner and do not let them stand or sit on it.
Page 13
• Only use the app to control the Kobold VR300 Robot Vacuum Cleaner when it is in sight. • Do not allow the Kobold VR300 Robot Vacuum Cleaner to drive towards drop-offs when operating it with the app.
Page 14
It may become damaged or demagnetised. • The app control makes it possible to use the Kobold VR300 Robot Vacuum Cleaner even when you are on the move. Ensure that you have prepared your home so as to prevent any hazardous situations from arising.
Page 15
For your safety • Never clean the roller brush using liquids. The roller brush is not dishwasher safe or water- proof. • Do not use the device outdoors. • Do not use the robot vacuum cleaner in danger areas, such as near showers or swimming pools.
Page 16
The device complies with the safety regulations of the country in which it has been sold by an authorised Vorwerk organisa- tion. If the device is used in another country, compliance with the local safety standards cannot be guaranteed. Vorwerk...
For your safety Danger levels • For your safety, please also observe the hazard warnings in the text of the chapters that follow. The hazard warnings in the following chapters are identified by a warning sym- bol and/or signal word indicating a danger level: Danger level Warning symbol Signal word...
Getting started GETTING STARTED In this chapter, you will learn how to set up your Kobold VR300 Robot Vacuum Cleaner for use. You will learn about the basic functions of your robot vacuum cleaner and how to handle the device.
Getting started The Kobold VR300 Robot Vacuum Cleaner is not fully charged on delivery and must, therefore, be fully charged before using it for the first time (see Chapter ”3 Charging” on page 24). Carrying the Kobold VR300 Robot Vacuum Cleaner •...
Getting started Assembly 2.3.1 Removing the transparent protective films • Remove the transparent protective films from the Kobold VR300 Robot Vacu- um Cleaner and the base station. 2.3.2 Inserting the filter Note! Risk of damage from improper use! • Never operate the device without a filter.
• Place the base station on a level surface next to a wall so that the charging contacts and infrared window are freely accessible for the Kobold VR300 Robot Vacuum Cleaner (Figure 2.4). Ideally there should be no height differ- ences or obstacles 0.3 m above the base station or 0.5 m either side of it.
Getting started Releasing the transport lock The Kobold VR300 Robot Vacuum Cleaner comes with an integrated transport lock. To release the transport lock, you must first connect the robot vacuum cleaner to the base station: • Place the robot vacuum cleaner in front of the base station •...
Getting started Operator panel overview The operator panel consists of two function keys and four LED indicators. The LED indicators show you the current status. Using the function keys you can switch between the different functions. Item Display Meaning WiFi The Wi-Fi indicator shows whether or not the device is connected to your home network or whether it is actively looking for a connection (see Chapter “5.3 Establishing a Wi-Fi connection”...
2 to 3 hours to charge the battery. Charging on the base station To charge your Kobold VR300 Robot Vacuum Cleaner before using it for the first time or when the battery is completely empty, please proceed as follows: •...
Automatic charging Once floor cleaning is complete or when the battery charge level drops too low, the Kobold VR300 Robot Vacuum Cleaner automatically returns to the base sta- tion for charging. When the robot vacuum cleaner has finished cleaning and re- turned to the base station, the BASE indicator lights up permanently.
Charging If you move the robot vacuum cleaner manually during cleaning, it may not be able to find its way back to the base station. The robot can only be restarted when the battery charge level is at least 25%. Returning to the base station To send the robot vacuum cleaner to the bas station, it must be able to locate the base station.
Page 27
24). * The actual running time of the Kobold VR300 Robot Vacuum Cleaner can vary depending on the type of flooring it is cleaning or how warm it is. If it is cleaning a carpet, or it is very warm in summer, it will need more battery power.
Page 28
90 minutes*. * The actual running time of the Kobold VR300 Robot Vacuum Cleaner can vary depending on the type of flooring it is cleaning or how warm it is. If it is cleaning a carpet, or it is very warm in summer, it will need more battery power.
• again starts the robot vacuum cleaner in normal cleaning mode. When its battery charge level is low, the Kobold VR300 notifies you that the cleaning period may be reduced by its LED indicator flashing green for ap- proximately 5 seconds. You can, however, still start the cleaning process by Figure 4.1 Starting the robot vacuum...
Operation Selecting a cleaning mode The Kobold VR300 Robot Vacuum Cleaner has two cleaning options: ALL ROOMS (normal cleaning mode) and SPOT cleaning mode. 4.2.1 Normal cleaning mode (ALL ROOMS) FUNCTION The normal cleaning mode ALL ROOMS is pre-configured and is activated by pressing the start button.
Page 31
Operation SWITCHING TO “ALL ROOMS” MODE You can switch back to normal cleaning mode from another setting using the operator panel as follows: • Press the function key until both the SPOT and BASE lights go out. You are now in “All Rooms” mode •...
Page 32
Operation 4.2.2 SPOT cleaning mode FUNCTION The SPOT cleaning mode is suitable for cleaning a smaller area. Set the Kobold VR300 Robot Vacuum Cleaner down with the bumper facing forward in front of the area you want to clean. The robot vacuum cleaner moves in straight, parallel lines and cleans an area of approx.
Page 33
Operation 4.2.3 ECO mode FUNCTION In ECO mode, the robot vacuum cleaner works with reduced motor perfor- mance. It is quieter and uses less energy. In ECO mode, the battery capacity of the robot vacuum cleaner is sufficient for up to 90 minutes. ACTIVATING THE ECO OPTION •...
Switching off the robot vacuum cleaner USER SWITCH OFF If you do not want to use the Kobold VR300 Robot Vacuum Cleaner for an ex- tended period of time (e.g. while on holiday), you can switch it off entirely. To switch off the robot vacuum cleaner, proceed as follows: •...
Operation AUTOMATIC SWITCH OFF The robot vacuum cleaner switches off automatically after 15 minutes if: it is not docked on the base station and it is not connected to Wi-Fi (see Chapter “5 Wi-Fi and app control using smart devices*” on page 38 for more information) and no schedule has been activated for the next 15 hours.
Page 36
Operation 4.5.2 Sensors In order to recognise and take account of obstacles when navigating the area to be cleaned, the Kobold VR300 Robot Vacuum Cleaner is equipped with the fol- lowing: 3 floor sensors 1 wall following sensor 2 contact sensors on the top bumper (LDS)
Page 37
Operation 4.5.3 Magnetic strip (optional accessory) The magnetic strip is an optional accessory and is available separately. It fulfils the same function as the no-go lines in the Kobold Robot app. You can use the magnetic strip to outline the area to be cleaned without hav- ing to close a door.
Wi-Fi and app control using smart devices* WI-FI AND APP CONTROL USING SMART DEVICES* Using the Kobold Robot app, you can control the Kobold VR300 Robot Vacuum Cleaner from your smartphone or tablet. The technical requirements and neces- sary steps are explained in this chapter.
Wi-Fi and app control using smart devices* SMART DEVICE The Kobold Robot app is compatible with all standard smartphones and tablets with iOS or Android operating systems. For more detailed information on cur- rently supported devices, see the Kobold Robot app page in the Google Play Store or the Apple App Store.
Wi-Fi and app control using smart devices* Establishing a Wi-Fi connection When you first switch your robot vacuum cleaner on, the WiFi function is deacti- vated and the WiFi symbol is not illuminated. • To establish a Wi-Fi connection, follow the exact instructions in the Kobold Robot app (see Chapter “5.2 Installing the Kobold Robot app”...
Using the Kobold Robot app The remote control function on your Kobold VR300 Robot Vacuum Cleaner can only be operated using the app if your smart device and the robot vacuum clean- er are connected to the same Wi-Fi.
The WiFi settings are now reset. To reactivate them, perform all the steps described in Chapter “5.4 Connect- ing Kobold VR300 robot vacuum cleaners to smart devices” on page 41. Controlling Kobold VR300 Robot Vacuum Cleaners with Amazon Alexa Kobold VR300 Robot Vacuum Cleaner can be controlled by speech with Amazon Alexa, the voice assistant service of Amazon.
Maintenance MAINTENANCE Regular maintenance of your Kobold VR300 Robot Vacuum Cleaner will ensure optimum functionality and enjoyment. Helpful information on cleaning and car- ing for your robot vacuum cleaner is provided in the following chapter. Warning! Risk of electric shock! •...
Page 44
Maintenance The dust container can also be cleaned manually: • Remove the dust container from the dust compartment . To do this, pull the dust container out by the green tab • Open the dust container by taking out the filter on its narrow side. This is done by pulling the filter out of the dust container by the green lug on the filter frame...
The dust compartment cover can be closed by simply pressing from the in- side against the middle hinge Note! Risk of damage from improper use! • Never operate the Kobold VR300 Robot Vacuum Cleaner without the filter. Cleaning the side brush Figure 6.5 Reinstalling the dust container...
Maintenance Cleaning the roller brush Warning! Risk of electric shock! • Always switch the device off and disconnect the mains plug on the base station before all retrofitting, cleaning and maintenance work. Note! Risk of damage from improper use! • Never clean the roller brush using liquids. The roller brush is not dish- washer safe or waterproof.
• Clean the floor sensors on the underside of the Kobold VR300 Robot Vacu- um Cleaner with a cotton bud or a soft, clean cloth, but never with pointed or sharp objects. If the area of the sensors is very dirty, it can also be cleaned with a conven- tional vacuum cleaner.
Maintenance Cleaning the robot vacuum cleaner and the base station Note! Risk of damage from improper use! • Do not immerse the robot vacuum cleaner and the base station in wa- ter. • Use extreme care to avoid scratching the infrared window of the base station and do not cover it with stickers or other objects.
Software updates SOFTWARE UPDATES The software for the Kobold VR300 Robot Vacuum Cleaner is subject to continu- ous development and optimisation. To ensure that you benefit from these im- provements, the latest versions of the software are available via our app.
Warning! Risk of electric shock and injury! • Never attempt to repair the device yourself. Repairs to electrical appliances may only be carried out by a Vorwerk Customer Service Center, a workshop authorised by Vorwerk or a person with similar qualifications using original replacement parts in order to avoid hazards.
Page 51
The bumper is jammed. • Jiggle the bumper to release it. lights up red • Contact your Vorwerk Customer Service Center (see Chapter “11 Service” on page 58). FAULT POSSIBLE CAUSE AND RECTIFICATION The cleaning performance of the robot The dust container is probably full.
Page 52
Troubleshooting FAULT POSSIBLE CAUSE AND RECTIFICATION The robot vacuum cleaner is not The base station and/or robot vacuum cleaner may not be properly connected to the charging. power supply. • Make sure that the plug is properly connected to the jack on the base station. •...
Page 53
Make sure that there are no obstacles within an area of 0.5 metres on either side of the If faults cannot be rectified, base station or within 0.3 metres above it. please contact the Vorwerk You may have cleaned an area using SPOT cleaning mode. Customer Service Center (see Once the robot vacuum cleaner has cleaned the area, it automatically returns to the starting position and stops there.
• Use the free return options provided instead. • Contact your local council for more information. • You can also hand the device over to a Vorwerk Customer Service Center.
Disposal and environmental protection Information on the disposal of the battery The following information is intended for the disposal company, not for you as the user! The integrated lithium-ion batteries contain substances that may be harmful to the environment. Before scrapping the robot vacuum cleaner, the batteries must be removed from the device and taken to a battery collection centre.
(waste paper container, yellow bin, recycling depot, waste paper collection point, etc.). Vorwerk commissions authorised licensors for this. If you have any further queries, please contact the Vorwerk Customer Service Center (see Chapter “11 Service” on page 58).
We are actively involved in cutting back on waste packaging during the development stages and are committed to its disposal and recycling. SAVING ENERGY Vorwerk products protect the environment. They consume little energy yet pro- vide high suction performance. ENVIRONMENTALLY FRIENDLY PRODUCTION We place great emphasis on protecting the environment in the production of our products.
Page 58
Warranty WARRANTY Please refer to your contract documents for any warranty services. SERVICE Our service representatives are happy to help you. www.vorwerk-kobold.com...
Page 59
Technical data TECHNICAL DATA Kobold VR300 Robot Vacuum Cleaner KOBOLD VR300 Safety symbol ROBOT VACUUM CLEANER AND BASE Housing High-quality, recyclable plastic STATION Motor Maintenance-free DC motor Single-stage fan Base station input 100 – 240 volts alternating current, 50/60 Hertz...
Page 60
Declaration of conformity DECLARATION OF CONFORMITY Hereby, Vorwerk Elektrowerke GmbH & Co. KG declares that the radio equipment type Kobold VR300 vacuum cleaner is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following in-...
Page 64
VR300 SAUGROBOTER VR300 ROBOT VACUUM CLEANER ROBOT ASPIRATEUR VR300 DEUTSCHLAND SCHWEIZ/SUISSE Vorwerk Deutschland Stiftung & Co. KG Vorwerk Kobold Schweiz Mühlenweg 17-37 , 42270 Wuppertal Vorwerk International Strecker & Co. ORIGINAL www.vorwerk-kobold.de Christoph Merian-Ring 23, 4153 Reinach BL Q UA L I T Y www.vorwerk-kobold.ch...
Need help?
Do you have a question about the Kobold VR300 and is the answer not in the manual?
Questions and answers