Kobold Vd15 Variable Nozzle - Vorwerk Kobold VT300 Instruction Manual

3 .7 .2

Kobold Vd15 VarIable nozzle

The Kobold VD15 Variable Nozzle is extremely versa-
tile. It has two attachments that can be used for dif-
ferent tasks.
1. Attach the socket
Electric Suction Hose.
The Variable Nozzle is provided with a joint
that you are able to vacuum at an angle of 90 de-
grees. The extendable and flexible tip
to reach even those corners and spots that are hard
to reach or very narrow. In addition, you can use
either the Drilling Dust Attachment or the Bristle
Brush with the tip
ADJUSTING THE LENGTH
1. Pull out the tip
2. To slide the extension back in again, push the
spring button
DRILLING DUST ATTACHMENT
The Drilling Dust Attachment allows you to collect
drilling dust. You can drill a hole into the wall with-
out having to worry about dust polluting your home.
1. Connect the Drilling Dust Attachment to the tip
of the Kobold VD15 Variable Nozzle.
2. Switch on the Kobold VT300 Cylinder Vacuum
Cleaner.
3. Place the Drilling Dust Attachment with the
black seal against the wall.
Due to the suction force of the Cylinder Vacuum
Cleaner, the Drilling Dust Attachment will adhere to
the wall by itself, provided it is completely even.
This way you can freely use your hands to drill the
hole.
of the Variable Nozzle to the
.
.
and then slide the tip back.
3
so
legend
allows you
Socket
Pivot
Tip (extendable)
Spring button
4
3
1
2