Kobold Vf200 Carpet Freshener - Vorwerk Kobold VT300 Instruction Manual

98 99 Troubleshooting
5 .3

Kobold Vf200 carPet freshener

fault
The cleaning performance of the
Carpet Freshener is significantly
reduced.
After brush cleaning, the device does
not work any more.
3
Possible causes and rectification
There may be cleaning residue from a previous carpet
cleaning in the device, preventing proper functioning
of the Carpet Freshener.
•
The dosage of Kobosan Active may not have been suf-
ficient, or the properties of your carpet make it unsuit-
able for cleaning with the Carpet Freshener.
•
•
The Carpet Freshener is not properly connected to the
Cylinder Vacuum Cleaner.
•
2
The foot switch was not adequately pressed
dosage of the Kobosan Active.
•
1
Clean the dosage hopper and brush as described in
chapter "3.2.7 Cleaning the Kobold VF200 Carpet
Freshener after use" on page 39.
Check whether your carpet can be cleaned with the
Carpet Freshener.
Check whether the dosage of Kobosan Active was
sufficient as specified in the chapter "3.2.1 Carpet
cleaning with the Kobold VF200 Carpet Freshener"
on page 34.
Check if the plug connection between the Carpet
Freshener and the Cylinder Vacuum Cleaner is cor-
rectly engaged .
Operate Kobosan Active dosage with the foot switch
.
to start