Attaching The Kobold Sp600; Setting And Releasing The Standby Position; On The Kobold Sp600 - Vorwerk Kobold VT300 Instruction Manual

46 47 Operation
3 .4 .4

attachIng the Kobold sP600

The SP600 must first be attached to the Kobold
Cylinder Vacuum Cleaner:
1. Connect the attachment socket
Cylinder Vacuum Cleaner to the pivot on the
SP600 .
2. Make sure you hear the attachment socket click
into the pivot.
3 .4 .5 settIng and releasIng the standby
PosItIon on the Kobold sP600
The Kobold VT300 Cylinder Vacuum Cleaner can be
combined with the Kobold SP600 in the usual way
and either used in the power setting or put in the
standby position.
PLACING THE DEVICE IN THE STANDBY POSITION
cautIon
risk of falling and causing injury!
The standby position is used to park the device
after you have finished working with it or when
you take a break.
• Ensure that the Cylinder Vacuum Cleaner and
Kobold SP600 are placed on a level surface
when put in the standby position.
• Never use the Kobold VT300 Cylinder Vacuum
Cleaner to support yourself.
• Never stand on the accessory heads.
note
risk of damage when the device starts up
automatically .
• Note that the Cylinder Vacuum Cleaner and the
Kobold SP600 start up automatically when the
vacuum cleaner is taken out of the standby
position if you have not first switched off the
vacuum cleaner at the main switch.
of the
1
2
1
2