Getting Started; Mains Connection; Pulling Out And Rewinding The Power Cord; Connecting The Power Cord - Vorwerk Kobold VT300 Instruction Manual

18 19

Getting started

2 gettIng started
In this chapter you will learn how to set up your
Kobold VT300 Cylinder Vacuum Cleaner for use.
You will get to know the basic functions of your
Cylinder Vacuum Cleaner and how to use it properly.
Your Cylinder Vacuum Cleaner is supplied with a
stopper to better protect it against damage in tran-
sit. You must first remove this stopper before you
can use the Cylinder Vacuum Cleaner.
2 .1

maIns connectIon

2 .1 .1 PullIng out and reWIndIng the
PoWer cord
WarnIng
risk of electric shock!
• Disconnect the mains plug from the socket
before using the cable reel to wind the power
cord back into the device!
cautIon
danger of damaging electrical parts!
• Make sure the device and power cord are not
damaged during winding up.
1. Carefully pull out the power cord
Kobold VT300 Cylinder Vacuum. When you see
the red mark on the power cord, this means that
the power cord can be pulled out another 50 cm
or so.
2. To rewind the power cord, pull the power cord a
little way out (approx. 2.5 cm).
The power cord will automatically wind back into
the device.
2 .1 .2

connectIng the PoWer cord

1. Connect the mains plug to the socket.
from the
1