Switching The Device On And Off, Setting The Power Performance Level; Switching On; Setting The Power Performance Level - Vorwerk Kobold VT300 Instruction Manual

24 25 Getting started
2 .4 sWItchIng the deVIce
on and off, settIng the
PoWer Performance
leVel
2 .4 .1

sWItchIng on

1. Switch the Kobold VT300 Cylinder Vacuum
Cleaner on by sliding the main switch
position forwards
2 .4 .2 settIng the PoWer Performance
leVel
In general, we recommend power performance level
auto (automatic suction power).
When the Kobold EB400 Automatic Electric
Brush is used, the suction power is regulated
automatically if the power performance level
'auto' has been set using the main switch
1. To manually set the suction power levels with
the main switch
auto automatic suction power (recommended)
soft minimum power
med medium power
max maximum power
We recommend vacuuming with the power
performance level auto when using all accessory
parts. The other power levels are specially
intended for specific uses. You will find these in
the chapters on the accessory parts.
.
, proceed as follows:
from
.
1
2
3