18
2
Figure 2.1 Folding up the carrying handle
First steps
The Kobold VR200 Robot Vacuum Cleaner is not fully charged on delivery.
The Robot Vacuum Cleaner must therefore be charged before using it for
the first time (see Chapter "2.6 Charging the Kobold VR200 Robot Vacuum
Cleaner" on page 21).
2.2
Carrying the Kobold VR200 Robot Vacuum Cleaner
•
Lightly press the unlock button for the
Doing so will enable you to lift up the carrying handle.
The carrying handle can only be lifted up to an angle of up to 45 degrees.
1
This is for stability reasons and to prevent dirt from accidentally falling
out of the dust container.
2.3
Installing the Kobold VR200 Robot Vacuum Cleaner
2.3.1
Removing the transparent protective films
•
Remove the transparent protective films from the Kobold VR200 Robot Vacuum
Cleaner and the base station.
1
dust compartment cover.
.
2