Brush - Vorwerk Kobold VT300 Instruction Manual

5 .5 Kobold Pb440 electrIc uPholstery brush
fault
The Electric
Upholstery Brush
will not operate.
The bristles of the Electric
Upholstery Brush are deformed or
matted.
The brushes of the Electric
Upholstery Brush no longer rotate.
Possible causes and rectification
The Electric Upholstery Brush was connected to the
TR15 Telescopic Tube or a Suction Hose without the
power cord.
• Connect the Electric Upholstery Brush to an Electric
Suction Hose.
The Cylinder Vacuum Cleaner is not switched on.
• Switch on the device.
Fringes or fabrics were vacuumed up and pulled out
again.
• Replace the suction nozzle.
The Cylinder Vacuum Cleaner is not switched on.
• Switch on the device.
The suction nozzle is not correctly inserted.
• Make sure to engage the suction nozzle properly.
Something was sucked in that is blocking the brushes.
• Switch the device off and unplug the mains plug
from the socket.
• Remove the object that was sucked in.
• Switch the device back on.