General Apresa Configuration - Vidicode APRESA Installation Manual

o https://www.vidicode.com/support/vididev.pubkey
Installation
•
Extract the installation pack
tar xzf apresa-install-debian10.tgz
If it says "command not found", then first install tar (
•
Run the installation (this step has to be done as root)
apresa-install/run.sh
After the installation process, you will be prompted to enter a new admin password for the
web interface.
Security measures
Consider applying the following security measures, especially when Apresa is on the public internet.
•
Restrict access using a firewall on Apresa or outside of it, based on IP address or other rules, or give
access only through a VPN tunnel. Disable remote access to SSH, or allow access to SSH (port 22)
only for your own IP address. This might be configurable in the network settings of your virtual
machine as provided by your cloud service provider (e.g. Azure).
•
Configure automatic security updates of Debian Linux (Tools > System > Software update)
•
Use strong passwords for the web interface and use a strong password or key-based logon for SSH
•
Enable two-factor authentication using email (System settings > System > Log on Verification Code)

2.9.15. General APRESA configuration

The next step is to configure the APRESA to meet the specific needs of the owner or organization.
This is typically done by the assigned administrator employee. Please refer to the Admin manual for
further instructions. The Admin manual can be found on the Application CD and on
www.vidicode.com and
INSTALLATION MANUAL APRESA
www.callrecorderapresa.com
COPYRIGHT © 2011-2021 VIDICODE ®
).
apt-get install tar
50