Sna Conversion Status; Sna Conversion Parameters Change; Table 19. Netbios: Explorer Frames Type; Table 20. Sna: Token Ring Format - Enterasys SSIM-H2-02 Installation And User Manual

38
Explorer Frames Type
Sets the type of explorer that should be used for NetBios traffic.
Value
ARE
STE

Table 19. NetBios: Explorer Frames Type

Default: STE
TR Functional Address
The TR Functional Address is entered in the MAC address format.
Default: C00000:000080
Ethernet Group Address
The Ethernet Group Address is entered in the MAC address format.
Default: 030000:000001

SNA Conversion Status

Display only. Shows the current status of the SNA Conversion.
Possible values: Enabled and Disabled.

SNA Conversion Parameters Change

To change SNA conversion parameters select SNA conversion parameters
change on the Frame Conversion Configuration menu of the TS port.
SNA Frames Conversion
Sets the state of the SNA Frames Conversion. Possible values are Enabled and
Disabled. If the state is set to Disabled, SNA traffic will be dropped.
Default: Enabled
SNA: Token Ring Format
Sets the format of SNA frames on Token Ring.
Format
802.5

Table 20. SNA: Token Ring Format

SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
Use All Routes Explorer.
Use Spanning Tree Explorer.
Meaning
Frame in the IEEE 802.5 format.
Meaning
Configuration