Other Frames W/O Snap Conversion Status; Other Frames W/O Snap Conversion Parameters Change; Table 28. Other Frames W/O Snap: Token Ring Format; Table 29. Other Frames W/O Snap: Ethernet Format - Enterasys SSIM-H2-02 Installation And User Manual

42
Conversion. Possible values are Enabled and Disabled.

Other Frames w/o SNAP Conversion Parameters Change

To change Other Frames w/o SNAP conversion parameters select Other Frames
w/o SNAP conversion parameters change on the Frame Conversion
Configuration menu of the TS port. The following menu options are listed:
Other Frames w/o SNAP Frames Conversion
Sets the state of the Other Frames w/o SNAP frames Conversion. Possible values
are Enabled and Disabled. If the state is set to Disabled, Other Frames w/o SNAP
traffic will be dropped.
Default: Enabled
Other Frames w/o SNAP: Token Ring Format
Sets the format of Other Frames w/o SNAP frames on Token Ring.
Format
802.5

Table 28. Other Frames w/o SNAP: Token Ring Format

Other Frames w/o SNAP: Ethernet Format
Sets the format of Other Frames w/o SNAP frames on Ethernet.
Format
802.3

Table 29. Other Frames w/o SNAP: Ethernet Format

SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
Meaning
Frame in the IEEE 802.5 format.
Meaning
Frame in the IEEE 802.3 format.
Configuration