36
Source Routing
Enables or disables Source Routing in Novell frames transmitted to Token Ring.
Value
SR
noSR
Table 14. NOVELL: Source Routing
Default: noSR
Explorer Frames Type
Sets the type of explorer for IPX traffic.
Value
ARE
STE
Table 15. Novell: Explorer Frames Type
Default: STE
IPX Address Translation
Enables and disables reversing MAC address bits in Novell frames.
Possible values are do not bit reverse and bit reversed.
Default: do not bit reverse
NetBios Conversion Status
Display only. Shows the current status of the NetBios Conversion.
Possible values are Enabled and Disabled.
NetBios Conversion Parameters Change
To change NetBios conversion parameters select NetBios conversion parameters
change on the Frame Conversion Configuration menu of the TS port.
NetBios Frames Conversion
Determines how NetBios frames are converted. Possible values are Enabled and
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
Source Routing information will be added to frames
converted from Ethernet to Token Ring format.
Frame will be transmitted to Token Ring as a transparent
frame.
Use All Routes Explorer.
Use Spanning Tree Explorer.
Meaning
Meaning
Configuration