Other Frames W/Snap Conversion Status; Other Frames W/Snap Conversion Parameters Change; Table 23. Sna: Explorer Frames Type; Table 24. Other Frames W/Snap: Token Ring Format - Enterasys SSIM-H2-02 Installation And User Manual

Enterasys smartstack ssim-h2-02 interface module: user guide
Table of Contents

Advertisement

40
Explorer Frames Type
Sets the type of explorer that should be used for SNA traffic.
Value
ARE
STE

Table 23. SNA: Explorer Frames Type

Default: ARE

Other Frames w/SNAP Conversion Status

Display only. Shows the current status of the Other Frames With SNAP
Conversion. Possible values are Enabled and Disabled.

Other Frames w/SNAP Conversion Parameters Change

To change Other Frames w/SNAP conversion parameters select Other Frames w/
SNAP conversion parameters change on the Frame Conversion Configuration
menu of the TS port.
Other Frames w/SNAP Frames Conversion
Sets the state of the Other Frames w/SNAP Frames Conversion. Possible values are
Enabled and Disabled. If the state is set to Disabled, Other Frames w/SNAP traffic
will be dropped.
Default: Enabled
Other Frames w/SNAP: Token Ring Format
Sets the format of Other Frames w/SNAP frames on Token Ring.
Format
802.5 SNAP

Table 24. Other Frames w/SNAP: Token Ring Format

SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
Use All Routes Explorer.
Use Spanning Tree Explorer.
Frame in the IEEE 802.5 format with SNAP
Meaning
Meaning
Configuration

Advertisement

Table of Contents
loading

Table of Contents