34
Explorer Frames Type
Sets the type of explorer that should be used for ARP/RARP traffic. From the set
of IP protocols explorer frame type can be chosen only for ARP/RARP frames.
Other IP protocols can generate only STE explorer.
Value
ARE
STE
Table 10. IP: Explorer Frames Type
Value
ARE
STE
Table 11. IP: Explorer Frames Type
Default: STE (change to ARE for typical Token Ring behavior for ARP frames)
Enable IP Fragmentation
Enables or disables fragmentation of IP frames received from Token Ring and
transmitted to Ethernet. The possible values are Enabled and Disabled.
Default: Enabled
TR MAC Address for IP Multicasts
Allows entering the IP multicast address. The address is entered in the MAC
address format.
Default: C00000:040000
Novell Conversion Status
Display only. Shows the current status of the Novell Conversion.
Possible values are Enabled and Disabled.
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
The All Routes Explorer should be used.
Spanning Tree Explorer should be used.
Use All Routes Explorer.
Use Spanning Tree Explorer.
Meaning
Meaning
Configuration