Front Panel System Status Led Indicators - Enterasys RoamAbout RBT-8100 Installation Manual

Front Panel System Status LED Indicators

The front panel contains five LEDs, which are viewable with or without the front bezel to display
the system's operating state. The LEDs provide a status for the following system states:
• Power/Sleep
• System State
• Disk Activity
• NIC1 Activity
• NIC2 Activity
Table 1-6 Front Panel LED Functions
LED
Power/Sleep
System Status on
standby power
Fixed Disk Activity
NIC1 / NIC2 Activity
Identify
Color
Green
Off
Green
Amber
Off
Green
Amber
Off
Green
Green
Note: BIOS controls Power/Sleep LED.
State Description
ON Legacy Power On / ACPI S0 state
Blink Sleep / ACPI S1 state
OFF Power Off / ACPI S4 or S5 state
ON Running. BIOS Initialization complete, boot
started / normal operation
Blink Degraded condition
ON Critical or Non-Recoverable condition
Blink Non-Critical condition
OFF POST / System Stop
Random blink Hard disk activity. This is an 'OR' of the activity
for the onboard SCSI and IDE controllers.
ON Hard disk fault. Cleared when powered off
OFF No hard disk activity nor fault
On Link
Blink Network Activity
RBT-8100 Wireless Switch Installation Guide 1-5
Front Panel System Status LED Indicators