Faceplate (top view)
Figure 3-16 Removing the Fan Filter
Be careful when disconnecting the faceplate that the
wires do not come unplugged.
4. Install the replacement filter by reversing the removal pro-
cedure.
Replacing a Fan
Location – see
Figure 3-3
Cabletron part number = 81002005.
1. If necessary, remove the cover. (See
2. You must remove any cards that block access to the four screws
that secure the fan. (See the following figure.) Remove any
external cable(s) from each card.
Be sure to take the necessary precautions to discharge
static electricity before touching a card, and place the
card into an anti-static bag after removing it from the
FRX6000.
3-14
See caution below
(on
page
3-3).
page
3-4.)
FRX6000 Maintenance Guide, Rev 03