Replacing The 3.5" Diskette Drive; Removing The Chassis Faceplate - Cabletron Systems FRX6000 Maintenance Manual

Replacing the 3.5" Diskette Drive

Location – see Figure 3-3
Cabletron part number = 85208002.
1. If necessary, remove the cover. (See
2. Remove the three screws shown in the following figure, then
grasp the faceplate along the top edge and pull it forward and
down to pop it out.
Figure 3-12 Removing the Chassis Faceplate
3. Remove the two screws (and the metal tabs under them) that
secure the drive. (See the following figure.)
Testing & Replacing Components
(on page 3-3).
page 3-4.)
Screws Faceplate
Mounting
Bracket
3-11