Cabletron Systems SmartSwitch 6000 User Manual page 71

Any community name assigned in the SNMP Community
NOTE
Names screen is a password to its corresponding level of
access to Local Management. The community name assigned
Super-User access is the only one that gives the user complete
access to Local Management.
All passwords assigned in the 6C105 SNMP Community
NOTE
Names screen allow access to both the 6C105 Local
Management screens, and the Local Management screens of
the interface modules that are installed in the chassis. To
configure the interface module to not allow access to the
6C105 Local Management screens refer to
To establish community names, proceed as follows:
1. Use the arrow keys to highlight the Community Name field adjacent
to the selected access level.
2. Enter the password in the field (maximum 31 characters).
3. Press ENTER.
4. Repeat steps 1 through 3 to modify the other community names.
5. Use the arrow keys to highlight SAVE at the bottom of the screen and
press ENTER. The message "SAVED OK" displays. The community
names are saved to memory and their access modes implemented.
6E123-50 and 6E133-49 User's Guide
SNMP Community Names Screen
Section 5.16.
5-25