Chapter 3 Installation; Required Tools; Unpacking The 6E123-50 And 6E133-49 - Cabletron Systems SmartSwitch 6000 User Manual

Only qualified personnel should install the 6E123-50 and
6E133-49.
This chapter covers the following items:
•

Required tools

•

Unpacking the 6E123-50 and 6E133-49

• Installing the 6E123-50 and 6E133-49 in the 6C105 chassis
(Section 3.4)
• Connecting to the network
3.1 REQUIRED TOOLS
A Phillips screwdriver is required to install the Fast Ethernet Interface
Modules in the 6E123-50.
3.2 UNPACKING THE 6E123-50 AND 6E133-49
1. Open the box and remove the packing material protecting the module.
2. Verify the contents of the carton as listed in
Table 3-1 Contents of 6E123-50 and 6E133-49 Carton
6E123-50 and 6E133-49 User's Guide
CHAPTER 3
INSTALLATION
(Section 3.1)
(Section
Item
6E123-50 or 6E133-49
Release Notes
RJ21 Angle Adapter
(Section 3.2)
3.5)
Table 3-1.
Quantity
1
1
4
3-1