Port Level Security Configuration Screen - Cabletron Systems SmartSwitch 6000 User Manual

Chapter 5: Local Management
10. Use the arrow keys to highlight the SAVE command.
11. Press ENTER. The message "SAVED OK" displays and all ports of
the connector are set to the selected operating mode.
5.27 PORT LEVEL SECURITY CONFIGURATION
SCREEN
The Port Level Security Configuration screen,
similarly to the Repeater Level Security Configuration screen, except that
it is used to set the security of each port of a connector.
To access the Port Level Security Configuration screen, use the arrow
keys to highlight the PORT LEVEL SECURITY CONFIGURATION
menu item on the Repeater Configuration Menu screen and press ENTER.
The Port Level Security Configuration screen displays.
Event Message Line
Module Type: 6E123-50
Slot Number: X
Po rt State
1 [Secure]
2 [NonSecure] [
3 [Secure]
4 [NonSecure]
5 [NonSecure]
6 [NonSecure]
7 [NonSecure]
8 [NonSecure]
9 [NonSecure]
10 [NonSecure]
11 [NonSecure]
12 [NonSecure]
INTERFACE #: [1]
Figure 5-33 Port Level Security Configuration Screen
5-90
6E123-50 LOCAL MANAGEMENT
Port Level Security Configuration
Lock/Learn Action On Intruder
[LockOnNext] [DisablePort] [SendTrap]
Unlocked]
[LockedOnAddr] [DisablePort] [SendTrap]
[Unlocked]
[Unlocked]
[Unlocked]
[Unlocked]
[Unlocked]
[Unlocked]
[Unlocked]
[Unlocked]
[Unlocked]
SAVE
6E123-50 and 6E133-49 User's Guide
Figure 5-33, functions
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Secure Address
[00-00-00-00-00-00]
[xx.xx.xx.xx.xx.xx]
[00-00-00-00-00-00]
[00-00-00-00-00-00]
[00-00-00-00-00-00]
[00-00-00-00-00-00]
[00-00-00-00-00-00]
[00-00-00-00-00-00]
[00-00-00-00-00-00]
[00-00-00-00-00-00]
[00-00-00-00-00-00]
EXIT RETURN
27461_113