Cabletron Systems SmartSwitch 6000 User Manual page 146

Chapter 5: Local Management
OutQLen (Read-only)
The OutQLen field displays the length of the packet queue. The field
represents the total number of packets that can be contained in the queue.
Address (Read-only)
This field displays the MAC Address of the interface that is currently
being displayed.
Last Change (Read-only)
This field displays the last time that the interface was reset.
Admin Status (Read-only)
This field displays the current status of the interface. If this field displays
"Testing", no frames may be passed on this interface.
Oper Status (Read-only)
This field displays the current status of the interface. If this field displays
"Testing", no frames may be passed on this interface.
MTU (Read-only)
The MTU field displays the maximum frame size (in octets) that a frame
may contain to be received or transmitted from this interface.
Speed (Read-only)
The Speed field displays the theoretical maximum amount of bandwidth
that the interface can support in bits per second.
Link Status (Read-only)
This field displays the current link status of the interface. This field will
read either "Link" or "No Link".
Duplex Mode (Read-only)
This field indicates whether the interface is operating in normal or full
duplex mode. This field will read either "Standard" or "Full Duplex".
Interface [XX] (Command)
This command is used to enter an interface number for viewing statistics.
For instructions on how to use this command, refer to Section 5.30.1.
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to Section 5.30.2.
5-100 6E123-50 and 6E133-49 User's Guide