Module Selection Screen - Cabletron Systems SmartSwitch 6000 User Manual

5.12

MODULE SELECTION SCREEN

The Module Selection screen is the access point to Local Management for
all modules installed in the SmartSwitch 6000 chassis. By selecting a
module, the Module Menu for the selected device displays.
shows the Module Selection screen.
Module #
<1>
2
3
4
5
The following explains each Module Selection screen field as shown in
Figure 5-15.
Module #
The Module # field displays the slot in which the module is installed. The
module number enclosed in < > characters indicates the module to which
the management terminal or Telnet session is connected.
Module Type
The Module Type field displays the type of interface module that is
installed in each slot.
Serial #
Indicates the serial number of the module. The serial number of the device
is necessary when calling the Cabletron Systems Global Call Center.
6E123-50 and 6E133-49 User's Guide
6E122-26 LOCAL MANAGEMENT
Module Selection
Module Type
6E123-50
6E132-25
6E123-26
6E122-26
Figure 5-15 Module Selection Screen
Module Selection Screen
Serial # Hardware Revision
123456789
123456789
123456789
123456789
EXIT
Figure 5-15
XXX
XXX
XXX
XXX
RETURN
2269-39
5-33