System Resources Screen - Cabletron Systems SmartSwitch 6000 User Manual

Chapter 5: Local Management
5.20

SYSTEM RESOURCES SCREEN

The System Resources screen,
concerning the processor, the amount of FLASH memory, DRAM, and
NVRAM that is installed and how much of that memory is available.
Access the System Resources screen from the Module Specific
Configuration Menu screen by using the arrow keys to highlight the
SYSTEM RESOURCES menu item and pressing ENTER. The System
Resources screen displays.
Event Message Line
Module Type: 6E123-50
Module Uptime: X Days XHrs XMins
Flash Memory Installed : 4 MB
DRAM Installed:
NVRAM Installed:
SAVE
The following briefly explains each field of the System Resources screen.
Module Uptime (Read-only)
The time in days/hours/minutes that the module has been continuously
running.
CPU Type (Read-only)
Indicates the microprocessor used in the 6E123-50 and 6E133-49.
5-68
Figure
6E123-50 LOCAL MANAGEMENT
System Resources
CPU Type: i960 HT 25Mhz
16 MB
XX KB
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Figure 5-26 System Resources Screen
5-26, provides information
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Available:
Available:
Available:
EXIT
6E123-50 and 6E133-49 User's Guide
XX.XX.XX
XXXXX Bytes
XXXXX Bytes
XXXXX Bytes
RETURN
RETURN
2269_23