Using The Clear Counters Command; The Interface Statistics Screen - Cabletron Systems SmartSwitch 6000 User Manual

CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to

5.29.1 Using the Clear Counters Command

To reset all the statistics counters to zero, perform the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS field.
2. Press ENTER, the counters for the selected port are reset to zero.
5.30

THE INTERFACE STATISTICS SCREEN

The Interface Statistics screen is used to gather MIB-II statistics for all of
the 6E123-50 and 6E133-49 interfaces (ENET 1 through ENET 4 and
Fast Ethernet Interface Modules and all backplane interfaces) with the
exception of an HSIM installed in the 6E133-49.
Cabletron Systems HSIMs gather their own statistics, and may
NOTE
be viewed via the Local Management screens of the applicable
HSIM. Refer to your HSIM documentation for information on
how to access these screens.
Access the Interface Statistics screen by using the arrow keys to highlight
the INTERFACE STATISTICS menu item on the Module Statistics
Menu screen and pressing ENTER. The Interface Statistics screen,
Figure 5-36, displays.
6E123-50 and 6E133-49 User's Guide
The Interface Statistics Screen
Section 5.29.1.
5-97