C3K122-24 And C3K122-24P - Enterasys SecureStack C3K122-24 Hardware Installation Manual

Gigabit ethernet switch
Hide thumbs Also See for SecureStack C3K122-24:
Table of Contents

Advertisement

C3K Hardware Overview

C3K122-24 and C3K122-24P

The C3K122‐24 and C3K122‐24P (Figure
connections, which include:
Twenty‐four RJ45 ports (10/100/1000 Mbps, 1000BASE‐T copper ports). The 10/100/1000 Mbps 
fixed front panel ports can operate in either half‐duplex or full‐duplex mode, as determined 
by Auto‐Negotiation. The C3K122‐24P (only) is a PoE capable device. For more information 
on PoE support, see "PoE (Power over Ethernet) Support" on page
Four Combo Small Form Pluggable (SFP) slots provide you with the option of installing 
Mini‐GBICs for 1000BASE‐X and 100BASE‐FX fiber‐optic connections and 1000BASE‐T 
copper connections. 
Rear panel connectors for high‐speed connections in a stack configuration.
Rear panel Redundant Power Supply connector for a redundant power supply connection. 
The C3K122‐24 switch connects to an Enterasys C2RPS‐SYS using a C2RPS‐PSM Cable. The 
C3K122‐24P switch connects to an Enterasys C2RPS‐POE using a C2RPS‐POE Cable.
Slot for the optional C3K‐2XFP Input/Output Module (IOM). For more information about the 
C3K‐2XFP, see "C3K‐2XFP Input/Output Module" on page
Figure 1-1
1 DB9 RS232 console port connector
2 Status LEDs
3 Twenty-four RJ45, 10/100/1000 Mbps ports
4 Four Combo SFP slots
5 Optional C3K-2XFP IOM
6 SFP port status LEDs
1-2 Introduction
Caution: The C3K122-24 is not a PoE-compliant device. Do not connect a SecureStack
C2 PoE Redundant Power System (C2RPS-POE) to the power connector. Otherwise,
damage to the device may result.
Precaución: El dispositivo C3K122-24 no cumple con el estándar PoE. No conecte una
fuente de poder redundante (RPS) SecureStack C2 PoE (C2RPS-POE) al cable de
corriente directa. De lo contrario, el dispositivo puede dañarse.
Note: Each of these Mini-GBIC ports eliminates the availability of one RJ45 port on a
C3K122-24 or C3K122-24P switch. For example, when a Mini-GBIC installed in one of
the Combo SFP ports (21 through 24) establishes a link, the associated fixed front
panel RJ45 10BASE-T/100BASE-TX/1000BASE-T port is disabled.
C3K122-24 and C3K122-24P (Shown with Optional C3K-2XFP)
1‐1) have several types of front panel port and rear panel 
1‐4. 
7 RJ45 port status LEDs
8 Password Reset button
9 Two ports for stack connections
10 AC power input connector
11 Redundant power supply (RPS) DC connector
1‐5.

Advertisement

Table of Contents
loading

Table of Contents