C3K172-24 - Enterasys SecureStack C3K122-24 Hardware Installation Manual

C3K172-24

The C3K172‐24 (Figure
which include:
• Twenty‐four SFP slots provide you with the option of installing Small Form Factor Pluggable
(SFP) Mini‐GBICs for 1000BASE‐FX and 100BASE‐FX fiber‐optic connections and 1000BASE‐T
copper connections.
• Rear panel connectors for high‐speed connections in a stack configuration.
• Rear panel Redundant Power Supply connector for a redundant power supply connection.
The switch connects to an Enterasys C2RPS‐SYS using a C2RPS‐PSM Cable.
• Slot for the optional C3K‐2XFP Input/Output Module (IOM).
Caution: The C3K172-24 is not a PoE-compliant device. Do not connect a SecureStack
C2 PoE Redundant Power System (C2RPS-POE) to the power connector. Otherwise,
damage to the device may result.
Precaución: El dispositivo C3K172-24 no cumple con el estándar PoE. No conecte una
fuente de poder redundante (RPS) SecureStack C2 PoE (C2RPS-POE) al cable de
corriente directa. De lo contrario, el dispositivo puede dañarse.
Figure 1-2
1 DB9 RS232 console port connector
2 Status LEDs
3 Twenty-four SFP slots
4 Optional C3K-2XFP IOM
5 SFP port status LEDs
1‐2) has several types of front panel port and rear panel connections,
C3K172-24 (Shown with Optional C3K-2XFP)
6 Password Reset button
7 Two ports for stack connections
8 AC power input connector
9 Redundant power supply (RPS) DC connector
SecureStack C3K Hardware Installation Guide 1-3
C3K Hardware Overview