Depending on the firmware version used in the switch, some features described in this document
may not be supported. Refer to the Release Notes shipped with your C3K switch
features are supported.
For information about...
C3K Hardware Overview
PoE (Power over Ethernet) Support
Management
Standards Compatibility
LANVIEW Diagnostic LEDs
C3K Hardware Overview
The SecureStack C3K series of stackable switches can be adapted and scaled to help meet your
network needs. The C3K series consists of the C3K122‐24, C3K122‐24P, and C3K172‐24 switches
and C3K‐2XFP Input/Output Module (IOM).
C3K switches support the following features:
•
Redundant power supply connection for external power supply
•
Installation on a flat surface
•
Installation into a standard 19‐inch rack
•
Connectable to a network backbone of up to eight total switches using high‐speed stack
connections
•
Configuration of switch functions using Enterasys WebView application, CLI switching
commands, and/or SNMP
C3K switches are described in detail in the following sections.
Important Notice
SecureStack C3K Hardware Installation Guide 1-1
1
Introduction
to determine which
Refer to page...
1-1
1-5
1-5
1-6
1-6