Switch Configuration Using Webview; Switch Configuration Using Cli Commands; Standards Compatibility - Enterasys SecureStack B2 B2G124-48P Hardware Installation Manual

Switch Configuration Using WebView

Enterasys Networks' HTTP‐based Web management application (WebView) is an
intuitive web tool for simple management tasks.

Switch Configuration Using CLI Commands

The CLI commands enable you to perform more complete switch configuration
management tasks.
For CLI command set information and how to configure the module, refer to the
SecureStack B2 Configuration Guide.

Standards Compatibility

The 1000BASE‐T ports are compliant with the following standards and operations:
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• Full‐Duplex operation
The SFP ports are compliant with the following standards and operations:
• IEEE 802.3z
• IEEE 802.3x Flow Control support for Full‐Duplex mode
• Auto‐negotiation for Full‐Duplex control operation
The stacking port provides 20 Gbps per port connected to Member switches for up and
down link connections.
Standards Compatibility
SecureStack B2 Installation Guide 1-7