Chapter 1: Features Overview
Management Platforms
You can manage the IA 1100/1200 using the following management platforms:
•
Command Line Interface (CLI) – An EMACS editor-like interface that accepts typed
commands and responds when applicable with messages or tables. You will use the
CLI to perform the basic setup procedures and configurations described in Chapter 3
and Chapter 4 of this guide.
•
SNMP MIBs and traps – The IA 1100/1200 supports SNMP v1 and many standard
networking MIBs. You can access the IA 1100/1200's SNMP agent using Cabletron
integration software for HP OpenView 5.x on Windows NT or Solaris 2.x, or Cabletron
Spectrum on Solaris 2.x. Chapter 3, "Basic System Setup" on page 19 in this guide
explains how to set up SNMP on the IA 1100/1200.
10
Internet Appliance 1100/1200 Getting Started Guide