Adjusting Set Values - Viessmann PLC VITOCAL 350-HT PRO Service Instructions For Contractors

Adjusting set values

Launch with
■ "Menu"
"Set val."
■
Fig. 12
Buttons:
■ "HWB"
Set values for heating water buffer cylinder and high
temperature maintenance
"DHW"
■
Set values for domestic hot water (DHW cylinder)
"Coolant"
■
Set values for coolant buffer cylinder
■ "Comprssr"
Set values for compressors
"Applicatn limits"
■
Set values for application limits
■ "General"
General system settings
"EEV"
■
Set values for electronic expansion valve
■ "IHE"
Set values for internal heat exchanger
"CP"
■
Set values for circulation pumps
"Save"
■
Save changed set values
Note
The set values must be saved each time they are
changed. When the system is re-started, any set val-
ues that were not saved are overwritten with the last
saved values.
Configuring the system
19