System Data - Viessmann PLC VITOCAL 350-HT PRO Service Instructions For Contractors

Configuration
(cont.)

System data

On this page, you can change the data that is dis-
played on the main page. The data is not reset after
logging off.
If people are to be notified of faults via email, up to 5
email addresses can be given.
Launch with
■ "Menu"
■ "Configuration"
■ "Sys. details"
Fig. 8
Emails are sent for the following events:
Priority 1 fault has occurred
■
■ Priority 2 fault has occurred
■ Alarm no longer being issued (fault rectified)
Note
In order to send the emails, the system requires an
internet connection.
The network settings must be adapted. See page 14.
Configuring the system
15