Network - Viessmann PLC VITOCAL 350-HT PRO Service Instructions For Contractors

Configuring the system
Configuration
(cont.)

Network

Launch with
■ "Menu"
■ "Configuration"
■ "Network"
Fig. 7
Once the system is connected to an existing network,
the settings "IP address", "Subnet" and "Gateway"
must be agreed with the network administrator.
The "UID" is the number of the Modbus unit.
Note
The settings do not become effective until after they
have been saved. See "Configuration" -> "Save" in
Fig. 5.
14
!
Please note
If the programming unit is connected via the
Ethernet, it will no longer function once the
Ethernet address is changed.
The control system's new IP address must be
entered in the programming unit setup:
Touch the empty section on the screen until
■
the setup menu is displayed.
■ In "Web Connection" -> "Remote host IP",
enter the new IP address.
■ Confirm with "OK".
Tap the "Back" symbol twice (top left).
■
Save setting with "Safe".
■