Table of Contents
Advertisement
LOCATE CAMERA
AVERTX NETWORK CAMERA MANAGER
AvertX Network Camera Manager is a software tool that allows you to quickly and easily
connect and configure your AvertX IP Cameras. This software allows you to assign IP
addresses, manage users, configure video settings, and update firmware on multiple
cameras at once.
The Network Camera Manager software is pre-installed on all AvertX Recorders, and
included on the software CD with all AvertX IP cameras. It is also available for download
on the AvertX website.
Installation
You can install Network Camera Manager on any personal computer (PC) or laptop using
the software CD included with your AvertX IP camera or by downloading the program from
AvertX.net.
Note
Starting Network Camera Manager
After installing the program on your PC or laptop, open the program to begin configuring
your cameras.
To access Network Camera Manager on an AvertX recorder, you must operate the
recorder in Windows Mode.
1.
2.
3.
4.
16
Network Camera Manager will only work on PCs or laptops that use a Windows
operating system. It is compatible with Windows® XP, Vista, 7, and 8.
In the Live Screen, click Exit.
Click Restart in Windows Mode.
Click OK.
Double-click Network Camera Manager.
Advertisement
Table of Contents
