Picture Adjustment; Motion Detection - avertX HD6022-APW User Manual

Picture Adjustment

Each of the Picture Adjustment settings is set to the recommended default.
Brightness – Adjust the image's brightness on the camera. The Backlight value is
adjustable from 0 (dim) ~ +20 (brightest).
Sharpness – Increasing the sharpness level can make the image looked sharper; it
especially enhances an object's edge. The value of sharpness is adjustable from 0 ~ +10
(sharpest).
Contrast– Adjust the contrast value from -6 to 19.
Saturation– Adjust the color saturation form -6 to 19 (most saturation).
Hue– Adjust the hue from -12 to 13.
Backlight– Backlight compensation can correct for overly-bright backlit scenaries.
D-WDR Function– Turn the Digital Wide Dynamic Range Off, or adjust between 1 and 3.
Click Set after making changes to the Picture Adjustment settings to save the settings and
update the Live screen.

Motion Detection

Use the Motion Detection menu to configure the motion detection window(s). Here, Motion
Detection can be turned On or Off, and other general settings can be specified.
To enable motion detection:
1.
Note
2.
3.
4.
5.
28
Use the Motion Detection dropdown to
select a motion detection preset (1-4). If
choosing an additional preset after 1, check
the On checkbox.
A motion detection preset can be turned Off
at a later time.
If desired, check the By Schedule check box
and use the dropdown menu to select a
schedule.
Designate the Motion Detection Setting
values.
Check the appropriate boxes to designate the Trigger Action.
Click Save.