Honeywell BC-200 Operation, Installation & Programming Manual page 61

Panel Operation
7.3.5.1.3 S
ERVICE
Once you have selected the Digital Input you wish to change you will be in the "Modify Point" screen as follows:
MODIFY POINT
DAY MODE
20 JULY 2002 14:44:37
PLEASE ENTER THE INFORMATION BELOW:
SELECTED POINT: 1.4.i1
NAME. >
Overwrite mode
BC-200 Manual – P/N DOC-01-013
M – C – D
ENU ONFIG
A = 0
F = 0
I = 0
N = 1
Use arrows to move
around. INS,DEL to edit
lines. ENTER accept
line and/or Skip to
next item ESC to leave
this screen
ESC
BACKSP ENTER
IN
Actions:
Use the external keyboard to enter a descriptor (up to
28 characters) for the output and press the
ENTER button.
You will then be prompted to accept. Press the YES
button to accept or the NO button to redo.
A descriptor is the only configurable option for a digital
input.
ESC will take you back to the previous screen.
61