Honeywell BC-200 Operation, Installation & Programming Manual page 68

Panel Operation
7.3.6.5 S
ERVICE
This menu item allows several diagnostic functions to be performed on the loops themselves. Firstly you will be
prompted to enter a loop number. Then the screen will appear as follows:
ANALOG MENU - LOOP
DAY MODE
20 JULY 2002 14:44:37
LOOP 1 SELECTED:
LCM Version
Loop wiring style
Device led blink
Detector Poll Style
Module Poll Style
Soft button functions:
ON/OFF -> Turn device LED blink ON/OFF
AUTOPROG -> Look for new devices on loop
TOGGLE -> Change the poll mode on loop
NEXT
AUTOPRG
OFF
Note: Applicable to V4.xx and below firmware
If the panel is powered down all loops will initialise with led blinking on. Where required, led blinking needs to
be turned off manually after a power up; the panel will not save the state of led blink after a cold reboot.
7.3.6.6 S
ERVICE
This menu item allows you to set the Loop styles to either Open or Closed loops. The screen will appear as
follows:
ANALOG MENU - LOOPS
DAY MODE
20 JULY 2002 14:44:37
LOOP 1 is Open Loop
LOOP 2 is Closed Loop
LOOP 3 is Closed Loop
LOOP 4 is Closed Loop
LOOP 5 is Closed Loop
LOOP 6 is Closed Loop
LOOP 7 is Closed Loop
LOOP 8 is Closed Loop
LOOP 9 is Closed Loop
LOOP 10 is Closed Loop
SET LOOP STYLE FOR INSTALLED LCM/LEM
UP
DOWN
BC-200 Manual – P/N DOC-01-013
M – A
ENU NALOG
A = 0
F = 0
I = 0
N = 0
-> 2.11
-> Open
-> ON
-> FLASHSCAN
-> FLASHSCAN
MENU
TOGGLE
M – A
ENU NALOG
A = 0
F = 0
I = 0
N = 0
BACK
TOGGLE
– L
OOP
Actions:
Use the NEXT buttons to move to the next loop.
Pressing the OFF button will turn device blinking off on
the selected loop. If device blinking is already off,
the button will toggle to ON .
Press the AUOTPRG button to Auto Program the
selected loop. This will add any new detectors and
modules placed on the loop.
Pressing the MENU button will return you to the
service menu.
– A
NALOG
Actions:
Use the UP / DOWN buttons to move to the next
loop.
Pressing the TOGGLE button will change the loop
style for the selected loop between Open and
Closed.
Pressing the BACK button will return you to the
previous menu.
68