Honeywell BC-200 Operation, Installation & Programming Manual page 53

Panel Operation
7.3.4.5 S
ERVICE
This screen allows the operator to isolate or de-isolate a virtual point.
ISOLATE / DE-ISOLATE A POINT
DAY MODE
20 JULY 2002 14:44:37
SELECT A POINT TO ISOLATE:
VP1 UNNAMED POINT
VP2 UNNAMED POINT
VP3 UNNAMED POINT
VP4 UNNAMED POINT
VP5 UNNAMED POINT
VP6 UNNAMED POINT
VP7 UNNAMED POINT
VP8 UNNAMED POINT
VP9 UNNAMED POINT
VP10 UNNAMED POINT
VP11 UNNAMED POINT
VP12 UNNAMED POINT
VP13 UNNAMED POINT
VP14 UNNAMED POINT
VP15 UNNAMED POINT
VP16 UNNAMED POINT
VP17 UNNAMED POINT
UP DOWN
BC-200 Manual – P/N DOC-01-013
M – I
ENU SOLATE
A = 0
F = 0
I = 0
N = 0
ACKN ISOL DEISOL
– V P
IRTUAL OINT
Actions:
Use the UP and DOWN buttons to select the
appropriate point and then press the ISOL button
to isolate or the DEISOL button to de-isolate the
point. If the point is isolated, an "I" will appear on
the right hand side of the screen next to the point.
L
IST
53