Craftex CX407N User Manual page 6

UNPACKING
The machine is properly packaged and
shipped completely
transportation. When unpacking, carefully
inspect the box and ensure that nothing has
been damaged during transit. Open the box
and check that the machine and the parts
are in good condition.
WARNING!
CX407N is a heavy machine, do not
over-exert yourself.
Figure-1 Inventory
LIST OF CONTENTS
A. Air Cleaner ...................................... 1
B. Primary Filter (5-Micron).................. 1
C. Secondary Filter (1-Micron)............. 1
in box for safe
QTY
Figure-2 Inventory
LIST OF CONTENTS
D. Remote Control................................ 1
E. AAA Battery ..................................... 2
F. Flange Bracket................................. 4
G. Rubber Feet ..................................... 4
H. Eye Bolts (M10 - 1.5) ....................... 4
I. Hex Bolts (M6-1.0 x 8) ..................... 8
J. Flat Washers (6 mm) ....................... 8
NOTE: While doing inventory, if you can not
find any part, check if the part is already
installed on the machine.
Some of the parts come preassembled with
the machine because of shipping purposes.
QTY
6