Table of Contents
Advertisement
CHANGING / SERVICING
THE FILTERS
Disconnect the unit from the power source.
Move the retainer latch upward and remove
the primary filter as shown in figure-10.
Remove the secondary filter and wash it
with warm water until it is clean. Let it dry.
See figure-11.
Figure-10 Removing the primary filter
Remember not to clean the secondary filter
using compressed air. Doing so, will
damage the filter and reduce the filtering
qaulity.
Figure-11 Secondary filter
Vaccum the dust inside the air cleaner and
reinstall the secondary filter.
Install a new primary filter and push the
retainer latch down to hold the filter.
12
Advertisement
Table of Contents
