Table of Contents
Advertisement
Commissioning, inspection, maintenance
Maintenance and cleaning work
Note
The maintenance and cleaning intervals are intended
as a guide that can be adapted, if required, to the fuel
quality and operating conditions. Clean the entire heat-
ing system at least once a year.
Emptying the ash box
Danger
During maintenance and cleaning work, and
when manipulating the ash box, there is a risk of
fire and burns due to hot parts and ash.
■
Wear suitable personal protective equipment,
in particular protective gloves.
Only dispose of the hot ash in fireproof con-
■
tainers with covers.
Remove the ash box
3.
C
A
B
2.
1.
Fig. 54
1. Press and hold down spring clip
2. Pull open locking handle
3. Fold clamping clip
C
4. Pull ash box approx. 15 cm forward.
72
4.
.
A
B
.
to the side.
(cont.)
Danger
Wood dust, pellet dust, cinders and soot pose a
risk to the eyes, skin and airways.
Wear suitable personal protective equipment,
especially breathing equipment and safety gog-
gles.
Ash box data
■
Empty: 16 kg
■
Full: Approx. 40 kg
5.
D
E
6.
5. Pull and hold pin
6. Pull ash partition
until pin
locks home in the next hole.
D
7. Remove ash box and empty.
.
D
E
in the direction of the arrow
Advertisement
Table of Contents
