Table of Contents
Advertisement
Commissioning the heating system
Selecting external analogue input
Available if "No" was selected for the cascade.
Press the following buttons:
1.
/
for external default output with external ana-
|
~
logue input "Yes/No".
Setting the number of buffer temperature sensors
Available if "No" was selected for the cascade.
Press the following keys:
1.
/
for heating water buffer cylinder temperature
|
~
sensor "No", "3", "4" or "5".
The number of connected sensors is auto-
matically recognised and preset.
Selecting the type of heating water buffer cylinder
Available if the following settings were previously
selected:
Buffer temperature sensor "3", "4" or "5"
■
and
■
Cascade "No".
Setting the heating water buffer cylinder minimum temperature (top)
Available if "1" was selected for the buffer type.
Press the following buttons:
1.
/
for setting the minimum temperature of the top or
|
~
first temperature sensor of the heating water buffer cylinder.
Setting buffer charging up to buffer temperature sensor
Available if the number of buffer temperature sensors
selected was
0.
>
Press the following buttons:
1.
/
Heating water buffer cylinder charging up to
|
~
the temperature sensor of the heating water
buffer cylinder "1", "2", "3", "4" or "5".
Commissioning, inspection, maintenance
(cont.)
2.
to confirm.
d
2.
to confirm.
d
To change the point for capturing the system tempera-
ture from the top or 1st temperature sensor to the
2nd temperature sensor in the heating water buffer cyl-
inder, select buffer type 1:
1.
/
for buffer type.
|
~
2.
to confirm.
d
2.
to confirm.
d
2.
d
to confirm.
61
Advertisement
Table of Contents
