Viessmann Vitoligno 300-H Installation And Service Instructions For Contractors page 97

Code 1
(cont.)
Coding in the delivered condition
Discharge delay
32:5 Delay of 5 seconds
External charging cycle - ON
40:5 External charging cycle of
5 seconds
External charging cycle - OFF
41:0 External charging cycle of
0 seconds
External charging delay
42:5 Delay to external charging
5 seconds
Discharge, reversing interval
BD:... Interval: Discharge system
changes direction of rotation
Discharge, preferred direction
BE:... Preferred direction of discharge
Delay, hydraulic drive unit
C1:... Delay to hydraulic drive unit
Transverse screw conveyor, emergency mode delay
C2:... Emergency mode delay of the
transverse screw conveyor
Hydraulic drive unit, emergency mode
C3:2 Emergency mode delay of the hy-
draulic drive unit
Buffer
Coding
Coding in the delivered condition
Maximum set temperature, buffer cylinder
34:85 Max. average temperature of the
heating water buffer cylinder, 85 °C
(upper limit of control range)
Minimum set temperature, buffer cylinder
35:60 Min. set temperature of the heating
water buffer cylinder, 60 °C (lower
limit of control range)
Possible change
32:0 Setting range in seconds
to
32:300
40:2 Setting range in seconds
to
40:250
41:0 Setting range in seconds
to
41:1000
42:0 Setting range in seconds
to
42:300
BD:0 Setting range in seconds
to
BD:300
BE:0 0 = No
to 1 = Yes
BE:1
C1:0 Setting range in seconds
to
C1:300
C2:0 Setting range in seconds
to
C2:1000
C3:0 Setting range in seconds
to
C3:250
Possible change
34:30 Setting range in °C
to
34:100
35:30 Setting range in °C
to
35:100
Codes
97