Maintenance
Emptying the ash box
Empty the ash box regularly.
If "Empty ash box" is displayed on the control unit, empty the ash box immediately.
This applies when there are unburnt pellets in the ash box.
01. Open door A.
02. Open ash door B.
03. Flip bracket C of ash box D
down.
04. Slowly pull ash box D out as far as
possible.
54
D
C
05. Pull front ash container E out of
06. Pull rear ash container G forwards,
K
F
A
H
B
G
E
ash box D and seal it with cover
F.
remove lid H and seal ash
container for transport with cover
K.