Swing Dtcs - JLG 1500SJ Operation And Safety Manual

SECTION 5 - LCD DISPLAY PANEL - GENERATION 1 & 2

Swing DTCs

When the machine is swung more than what it is allowed for in
either left or right direction, the control system senses a swing
fault. When a swing DTC is active, the display shows a machine
image with green arc which indicates the allowed angle and the
portion other than the green arc indicates the restricted area to
show the swing DTC. Displays shows operator to extend the axles
by flashing the axles.
• Swing DTC will be displayed on the DTC tray with the num-
ber and system distress icon.
• Available functions on the machine are shown with green
arrows. Functions that are not available are grayed out.
• RPM and speed restriction icon will be displayed in the
Icons tray.
NOTE: Image below shows a left swing DTC. For right swing DTC, the
boom will be shown swung to the right.
5-48 – JLG Lift – 3121261