JLG 1500SJ Operation And Safety Manual page 61

18. Jib Telescope
Provides extension and retraction of the jib.
19. Soft Touch/SkyGuard Indicator (If Equipped)
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
20. Platform Rotate
Allows the operator to rotate the platform to
the left or right.
3121261
SECTION 3 - MACHINE CONTROLS AND INDICATORS
21. Lock Pin Indicator
When illuminated, indicates the jib is
centered and the jib lock pin is
engaged. When blinking, indicates the
jib is in the process of being stowed or centered. The indica-
tor is off when the lock pin is disengaged and the jib is
stowed (machine in transport position).
22. Function Speed Control
This control affects the speed of main boom
telescope, jib telescope, and jib lift. Turning
the knob all the way counterclockwise until
it clicks puts drive, main lift, platform rotate,
and swing into creep mode.
– JLG Lift – 3-17