Safety; Intended Use; General Safety Instructions - PI L-509 Series User Manual

2 Safety

2 Safety
In this Chapter

Intended Use .................................................................................................................................. 5

General Safety Instructions............................................................................................................ 5

Organizational Measures ............................................................................................................... 6
2.1 Intended Use
The L-509 is a laboratory device as defined by DIN EN 61010. It is intended for indoor use and
use in an environment that is free of dirt, oil and lubricants.
In accordance with its design and realization, the L-509 is intended for single-axis positioning,
adjusting and shifting of loads at different velocities. The L-509 is not intended for applications
in areas in which a failure would present severe risks to human beings or the environment.
The L-509 is intended for horizontal or vertical mounting. For the load limits with vertical
mounting, see "General Notes on Installation" (p. 17).
The intended use of the L-509 is only possible when completely mounted and connected.
The L-509 must be operated with a suitable controller (p. 12). The controller is not included in
the scope of delivery of the L-509.
2.2 General Safety Instructions
The L-509 is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the L-509.
 Only use the L-509 for its intended purpose, and only use it if it is in a good working
order.
 Read the user manual.
 Immediately eliminate any faults and malfunctions that are likely to affect safety.
The operator is responsible for the correct installation and operation of the L-509.
L-509 Stage MP141E Version: 1.1.0 5