RADEMACHER Fernotron Programming Centre Operating Instructions Manual page 54

Overview of all functions and parameters in expert mode
No. Function/Display
16 Switching DCF
radio clock on and off
17 Set light function
per group
18 Set SU/WI transmission
time
54
Parameter/Brief explanation
On and OFF
/
On = DCF radio clock on
OK
OFF = DCF radio clock off
ADVICE
Set to OFF if no DCF signalis to be,
or can be, received (beyond a
radius of approx. 1000 km around
Frankfurt). For example, too, if you
use the Programming Centre in a
different time zone.
On and OFF
/
On = Light function on
OK
OFF = Light function off
When electrical devices are connec-
ted, „On and OFF" appears in the
display. This also applies too for
the switching times.
Set a time at which the changeover
between summer and winter time
should be transmitted to all groups/
receivers (e. g. 08:00).
Set desired transmission time
/
(hours/minutes)
and confirm
OK
Option:
OFF = The SU/WI time change-
(factory setting)
(factory setting)
over will not be transmitted
(factory setting)