RADEMACHER Fernotron Programming Centre Operating Instructions Manual page 35

Automatic random operation
ADVICE
Activating/deactivating automatic random operation
Buttons
1.
M
2.
/
OK
3.
/
4.
/
5.
/
/
OK
6.
M
This setting results in a random delay of the set switching time of
between 0 and 30 minutes.
Automatic random operation does not apply for the dusk times.
Indication in the display
Open the menu
Select and open automatic
random operation (
Select group and receiver
Switch on automatic random
operation
On = ON
OFF = OFF (factory setting)
If desired, select the next recei-
ver and switch on automatic
random operationor
Quit the menu
ADVICE
If the automatic data transmission
was activated in expert mode (see
page 55, point 20, factory setting
= OFF), then you will be requested
to transmit data at this point (see
page 38).
)
35