RADEMACHER Fernotron Programming Centre Operating Instructions Manual page 36

Transmitting the current time/date to the receiver
IMPORTANT
ADVICE
Buttons
1.
M
2.
/
OK
3.
STOP
4.
36
When changing over from summer to winter time and vice versa
and also after a lengthy power cut, you must transmit the current
time and date to each receiver.
For the summer/winter time changeover you can transmit the
„ Time and date" automatically to the receiver. To do so, you must
activate and set the function „SU/WI transmission time" in ex-
pert mode (see page 52/54).
Indication in the display
Open the menu
Select and open
clock time ( )
Perform time and data trans-
mission to all receivers at the
same time
Each receiver acknowledges the
transmission with a short switch-
ing procedure.
ADVICE
If there is no acknowledgement,
press the Stop button again.