RADEMACHER Fernotron Programming Centre Operating Instructions Manual page 23

Automatic operation
ADVICE
MANU
Activating/deactivating automatic operation for a receiver
Buttons
1.
/
2.
OK
Press for
approx.
1 sec.
3.
AUTO All automatic functions are activated e.g.
Switching times
Automatic sunlight mode
Automatic dusk mode, etc.
Manual operation is still possible in automatic operation mode.
All automatic functions are switched off; only manual operation
is possible.
Indication in the display
Select the desired group and
receiver
Switch automatic operation on/
off
Automatic data transmission to the
receiver will begin at once.
ATTENTION
Switching over occurs even if the
button lock is activated.
This is followed by the normal
display again.
AUTO = Automatic operation on
MANU = Automatic oper. off
23